Sabbadius Custom Effects – Mr White

NZD $ 300.00

In stock

Description

 

 

Mr. White II

5 SUPER FEATURES of SABBADIUS Mr. White II

Analog pedal with 100% TRUE BYPASS mechanical footswitch.
Volume control with a small Crank Up booster that simulates the valves saturation stage of a Fender Vibroverb, Dumble, Bassman or Super Reverb amp.
Specially designed for highlighting guitar solos or simulating Tube Amps.
Stevie Ray Vaughan used played a very warm sound, rich in mid and harmonic tones, given by his guitar and the guitar equipment he used, such as Dumble Super Overdrive, Fender Super Reverb, Fender Vibroverb, Fender Bassman, among other equipment modified by Cesar Diaz.

SABBADIUS Mr. White II was developed to get closer to the sounds of the equipment mentioned above but, in the process, I found out different use and combination options you can get with this pedal and its controls:

1- Boosters simulating valve equipment in transistor amplifiers give more saturation to the sound.

2- If you already have a Vacuum Tube amp and you can not raise the volume to saturate the valves and get that particular tube amp sound, with the Mr. White II you can get the same natural saturation of your equipment at low volumes.

3- Long chains of pedals, which are not TBP (True Bypass), tend to take away the original sound from your equipment, such as treble and mid tones. By connecting the SABBADIUS Mr. White II at the end of the chain (before the amp), and setting the Master control to maximum and the Crank Up at 12 o´clock, you add all those bright and mid tones your sound lost in the long chain, thus getting your original sound back.

4- You can change the function of the SABBADIUS Mr. White II by connecting it before or after the gain pedals, such as the Overdrive, Fuzz or Distortion pedals.
If you connect the Mr. White II before a distortion pedal, it will add significant volume and feedback. The addition of these elements to the Distortion, Overdrive, Fuzz, etc. improves the harmonic tones, which is ideal for blues, rock, funk solo, among others.
If you connect the Mr. White II after the gain pedals such as Overdrive, Distortion or Fuzz pedals, it will saturate your distortions and add more sustain; it will “enhance” the sound as well as add volume to the solos or enrich the sound of your gain pedal.
This setting is recommended for styles such as Metal, Grunge, Hardcore, Hard Rock, Punk, etc.

5- If you are not keen on taking your amp to small places like pubs, bars or small rooms, you can turn your Mr. White II into a “Tube Amp Simulator Preamp”.
By connecting the Mr. White II at the end of your chain of pedals and directly to the console, you can achieve that valve amp sound, whether saturated or not, and handle the amount of volume and saturation from your pedal, so that you do not fully depend on the sound engineer.

Mr. White II’s controls:

Boost Control: The Crank Up Knob to drive the saturation of the sound.

Mode Switch: Two different modes Dirty / Clean Mode to choose from.

Master Output: Knob that controls the volume or output, and saturation.