Sinvertek – Fluid Time MKII – Digitally Controlled BBD Delay

NZD $ 299.00

In stock

Category:

Description

IMPORTANT NOTE:

 

–  Please only use 9v DC adapter, the voltage over 9v will burn the BBD chips!

– Please only connect Y cable ( 1 Stereo to 2 Mono ) to the FX LOOP and CTRL/CV Jack

 

The tone of the FLUID TIME MK II perfectly preserves the traditional features of Bucket Brigade Device (BBD), it is warm and hoarse, and full of the analog taste. More significantly, the tone is not only very clear, but also absolutely muffled. The FLUID TIME MK II features the unique delay structure, it equipped 5pcs reissued MN3208 BBD chips, the delay time reaches to 700ms. This is a relatively longer delay time, it can gives you more creative possibilities, and it make the FLUID TIME MK II can be more widely used. The FLUID TIME MK II is a pure analog delay which controlled by micro controller. The signal path is all consist of analog circuit, this design ensures the perfect tone quality. In analog circuit part, this pedal equipped a super buffer circuit, it can be used to buffer the original signal. During the performance and rehearsal, even facing of the most complex interference environment , the signal still remains very pure, it will not lose the top end of the sustain, also the air sense.

Controllers, compared with the traditional BBD analog delay, this pedal has a great breakthrough in use. Same as the digital delay, the FLUID TIME MK II also features the TAP TAMPO and TAP DIVISION function. When using TAP TAMPO function, you can get a LO-FI BBD delay signal with the delay time of up to 2s.  When using TAP DIVISION function, you can divide the current delay time to other beats. The control part of FLUID TIME MK II is consist of digital signal

 

Furthermore, except the common TURE BYPASS and BUFFER BYPASS, the FLUID TIME MK II was also equipped TRAIL BYPASS. The FLUID TIME MK II is designed a FX LOOP in the effect path, you can add any effects which you need in the loop, such as chorus, wah, flanger, and so on. In addition to the normal mode, the FLUID TIME MK II has 3 special working modes, they are, DUAL TIME mode, TAKE OFF mode and STEP OVER mode. When working in the DUAL TIME mode, you can set up 2 fixed delay times, and during the playing you can freely switching between these 2 delay times . When working in the TAKE OFF mode, you can get a amazing auditory effect caused by the increased feedback. The STEP OVER is a strange effect, like aliens are talking. Both TAKE OFF and STEP OVER can give you a unique tone on the stage.

 

The FLUID TIME MK II has powerful external control function. By connecting CTRL/CV JACK, you can control and switch the BYPASS, TAP TAMPO and special working modes. You can also connect CV pedal or generator to adjust the delay time, auto trigger the special working modes and adjust the parameters of special working modes. In order to ensure the professional tone and unsurpassed reliability, we chose the military-level PCB and high quality components.The FLUID TIME MK II specifically designed for the professional guitarists and senior equipment specialists and enthusiasts.

 

-FEATURES-

 

– Perfectly reproducting the classic 80’s analog delay tone

 

– Warm and clear tone which is never ambiguous

 

– All signal chain is pure analog circuit

 

– Equipped 5pcs reissued MN3208 BBD chips

 

– The delay time is up to 750ms

 

– TAP TAMPO & TAP DIVIDE Function

 

– 3 Types of Bypass, Ture Bypass, Buffer Bypass & Trails Bypass

 

– 3 Special Working Modes, DUAL TIME, STEP OVER, TAKE OFF

 

– Equipped FX LOOP

 

– Equipped buffer circuit, well maintain the top end of sustain

 

– The knobs & switches are multifunctional multiplexing

 

– Gain Boost Mode / Volume Boost Mode / Dual Boost Mode

 

– Connect external control units to activate special working mode

 

– Connect external control units to control BYPASS & TAP function

 

– Connect CV signal to auto trigger special working mode/adjust para.

 

– Connect CV signal to control delay time

 

– High quality electronic components

 

– Military – level PCB

 

– Power Supply  –  ONLY USE 9V DC ADAPTOR   /   NO BATTERY OPTION